Speaker Module
In design review card · advanced
Made by
Arghya Vyas
About this project
The speaker version of my audio jack module!
- MD0
- 1k
- MD1
- 68k
Journals
Follow the progress behind this project.
1h
Done the driver. Kept this one lowkey and simpler. much easier cause i already did the audio jack driver, which used a similar i2s structure.
2h
Done the case design! It looks a bit patchy on cad because i had to make speaker holes and also seal a button hole. but it should be fine when 3d printed!
40m
I wired up the PCB, unfortunately I had to remove a button to fit the speaker. But yeah wiring was simpler so thats a plus.
1h 40m
Made the schematic. Because im modifying an existing design it was much easier to make it. Added a speaker and powered it up using a decoupling capacitor to prevent any fuzzy sound during usage.
